Pionierul Constructor

Select System Type Select Country System Text Search
(1207 systems found)

Pionierul Constructor

Pionierul Constructor was a simple constructional system. It was made in Romania in the 1970s. There appears tobe a little discrepancy in hole spacing (12.8mm and 18.5mm) between some sets, which is why there are two entries from the database noted below.

Pionierul Constructor(a)

Manufacturer / Distributor

Cooperative 'Techometalica' ARAD, Str. Dimitrov, Bucharest

Info from the Metal Constructional Systems Database for PIONIERUL CONSTRUCTOR [a] (Ref:P Ca)

Maker

System Type
Hole pitch >12.7mm

Country
Romania

Dates
1970s

Material
Steel (probably)

Thread
M4 (probably)

Boss Type

Boss Thread

Diametrical Pitch of Gears

No. of Parts in System

Hole Pitch (Spacing) (mm)
12.8

Diameter of holes in Strips(mm)
4.1

Diameter of the Bore in Bosses(mm)

Diameter of Axle Rods(mm)

Types of Nuts and Bolts
Nuts:
Bolts:

Material/Finish of Nuts and Bolts

Size of the Nuts across Flats (mm)
`

Bolt diameter (mm)

Comments
From a manual with a line drawing of Lorry on its cover. JOC MECANO from same Metaloglobus firm, features same Lorry model, & also has multicolour parts, but its hole pitch is 12.5 against a reported 12.8 for this system.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for PIONIERUL CONSTRUCTOR [a] do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

Pionierul Constructor(b)

Manufacturer / Distributor

Cooperative 'Techometalica' ARAD, Str. Dimitrov, Bucharest

Info from the Metal Constructional Systems Database for PIONIERUL CONSTRUCTOR [b] (Ref:P Cb)

Maker

System Type
Hole pitch <12.7mm

Country
Romania

Dates
1970s

Material
Steel

Thread
M4

Boss Type
single-tapped

Boss Thread
M4

Diametrical Pitch of Gears
--

No. of Parts in System
27 (see comment *¹)

Hole Pitch (Spacing) (mm)
12.5

Diameter of holes in Strips(mm)
4.1 (see comment *²)

Diameter of the Bore in Bosses(mm)
4.3

Diameter of Axle Rods(mm)
4.0

Types of Nuts and Bolts
Nuts: hexagonal
Bolts: countersunk (slotted)

Material/Finish of Nuts and Bolts
Steel with a Bright plated finish

Size of the Nuts across Flats (mm)
6.9

Bolt diameter (mm)
7.3

Comments
From Tehnometalica firm with B'down Truck on lid & manual. Hole pitch aside parts may be similar to PIONIERUL CONSTRUCTOR [a] but some differ including 7 holes Sector Plate(s), & they are not multicoloured. compare with JOC MECANO parts. *¹In Set 2. *²Up to 4.5 in some parts.

NOTE - The 'Other Systems Newsletter' pages displayed further up this web page, may also include information on this system/era.

There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.